MOORING ROPE / TAIL / ANCHOR LINE

This rope is made of Superpoly Lines, which are special fibers created by a complex number of polymers, and is constructed into 8- or 12 strand are so light-weight that they float on water. Since it doesn’t absorb any water, its operation is very easy. It also boasts better performance and higher strength than those of general polyolefin ropes.

Mooring lines include primary mooring lines and mooring tails. The primary mooring line which requires high strength and light weight is used to fix the vessel on the shore; The mooring tails that connect the primary line and the mooring bollard should have good elasticity and wear resistance, provide the extension performance for the mooring system, and minimize the impact load caused by wind or waves.

The primary mooring lines and mooring tail can be connected with each other through shackles, splicing or cow hitch, which is convenient for releasing, mooring and replacing mooring tails, and prolongs the service life of the whole mooring system. The best way to improve the stability and efficiency of the mooring system is to select the most suitable mooring line according to the needs.

8-Strand: A braided construction with good strength and elongation. This construction can disperse wear without excessive damage to fibers, so it has good wear resistance.

12 Strand: The hollow single braided construction is very easy to splice, with higher strength and lower elongation. This construction can withstand more internal fiber damage and strength loss caused by cyclic load.